 |
Fans
Below is a listing of our most pouplar fans, please contact GFS Parts & Filters Sales for additional fans and other fan components such as belts, blades, bushings, etc.
|
|
Tube Axial Exhaust Fans - GFA Models
GFS tube axial fans feature a continuously welded housing for an airtight seal. The propellers are non-sparking cast aluminum for consistent air velocity at higher static pressures. The universal motor plates will allow adjustable belt tensioning. The bearings are of premium air handling quality, self-aligning, and have an L10 life of 40,000 hours. The belt guard provides protection from the rotating pulley (OSHA Requirement). Fan has been designed per AMCA 210 Standards.
Part No. |
Size |
Ring to Ring |
GFA-18 |
18" |
24" |
GFA-24 |
24" |
24" |
GFA-30 |
30" |
30" |
GFA-34 |
34" |
30" |
GFA-40 |
40" |
30" |
|
|
 |
TUBE AXIAL EXHAUST FANS - TAB Models
The ideal choice for installations with straight-through airflow in ducted or non-ducted systems. These tube axial fans are designed for commercial and industrial applications where low to medium air volumes are required at lower pressures. Units are pre-assembled at the factory and includes variable-pitch motor sheaves for maximum operating efficiency and on-site adjustment.
Part No. |
Size |
Ring to Ring |
TAB-12 |
12” |
18" |
TAB-18 |
18" |
22" |
TAB-24 |
24" |
23" |
TAB-30 |
30" |
24" |
TAB-36 |
36" |
29" |
TAB-42 |
42" |
30" |
TAB-48 |
48" |
33" |
|
|
 |
HIGH PERFORMANCE VANE AXIAL FANS
Designed for moving air through systems with resistance up to 4" water gauge loss. Vane axial fans are typically characterized by a propeller with a large hub and short, wide, airfoil blades. In addition, a set of guide vanes is installed in the fan housing to straighten out the rotation of the air stream created by the propeller. This combination of propeller design and guide vanes allows the fan to produce higher pressures and greater efficiencies. At lower static pressures, the vane axial fan will move large air volumes at lower speeds.
Size |
Ring to Ring |
18" |
13 1/2" |
20" |
15" |
24" |
17 1/2" |
30" |
21 1/4" |
36" |
25" |
42" |
29" |
48" |
34" |
|
|
 |
Mix Flow Inline Exhaust Fans
Mixed flow inline fans can be used with clean air for supply, exhaust, or return air installations. Designed to
excel in commercial applications where low sound is critical. In addition, these models are more efficient than
comparably sized tubular centrifugal and vane axial fans, thus reducing the required motor horsepower and
lowering operating costs.
Consult GFS.
|
|
