Downdraft-Premium Booths

The Ultra XL series of the refinish truck and large equipment spray booths are constructed of pre-painted white inside and out, dual skin insulated panels, PVC protected (a temporary plastic sheeting designed to protect panels while booth is being erected) panels. Explosion relief provided..

• Downdraft airflow
• Precise temperature
• Airflow management
• Contamination control
• Multi-filtered air
• High production environment
• Recirculating cure or forced air cure available
• Pre-coated booth finish
• 30% more illumination
• High quality finishes
• T-8 color corrected tubes

• Code Compliant

Quality Construction:

• White pre-coated galvanized G-90 steel panels
• Structural components ranging from 11 to 14 gauge steel

• Insulated construction reduces noise and ambient heat outside the booth, self sealing airtight panels

• No weld design eliminates rust prone areas
• Precise tolerance engineering
• Wall-mounted, 6-tube ETL listed Class 1, Division 2 fluorescent light fixtures with color-corrected T-8 tubes
• Equipment installation by certified technician

• Paint booth configurations: Drive-through or solid back, split cabin, or a combination of these
• Custom engineered for special applications
• Indoor or outdoor spray booth types

Flexible Modular Design

• Multiple width and length combinations allow for expansions from 24' to unlimited lengths

All GFS Truck and Large Equipment control panels are produced in-house in GFS' own state-of-the-art electrical facility. GFS does not rely on purchasing off-the-shelf control panels modified to fit an application, rather GFS designs and builds each panel to fit needs required for each individual application.

Standard Control Panels
Operate the fan, motor and lights. The panel enclosure includes panel mounted disconnect, magnetic motor stater with overloads, fuse branch circuits, panel mounted controls, and lighting transformer based on panel.

Deluxe Control Panels
These control panels are designed for applications such as booths with air makeup units, multiple booth operations or booths with automatic air balancing systems. Each control panel is designed for a single point wiring connection. All control wires are numbered for easy wire identification

. All components are labeled to match electrical schematic. Includes terminal strip for field wiring.

GFS WAVE Aqua Paint Booth Filter

The WAVE Aqua filter is engineered for maximum performance in shops spraying waterborne paints. GFS WAVE Aqua paint booth filters provide the highest level of removal efficiency with waterborne paints.

Paint Booth Parts & Filters

A complete listing of paint booth filters and replacement parts available for all Global Finishing Solution Paint Booths

A key to achieving a clean paint job is properly pressuring a paint booth. An Auto Balance System, which will properly pressurize a booth, is designed to automatically keep the booth balanced during operation. This system consists of a Variable Frequency Drive (VFD) that controls the exhaust fan motor, differential pressure gauge and sensing probes. The system monitors the interior booth pressure and will adjust the exhaust fan RPM's to what is needed for the volume of exhaust air, based on the incoming intake air velocity. The result is a booth that is balanced automatically and will stay in balance as the filters load up with paint overspray. This system will increase useful filter life, provide a constant airflow through the booth and automatically control booth pressure.

Benefits:

• Greatly improved process control
• Controls and directs overspray into filtration systems
• Controls and exhausts VOCs from the workplace
• Extends dry filter usage up to 50%
• Decreases energy cost up to 40% as compared to
damper systems
• Provides a cleaner system and paint finishes
• Saves on utility costs