
|

Our most popular and affordable product line, GFS Fast-Pack (Open Face) Paint Booths provide a safe, clean environment for your finishing operations.
Standard Open Face Industrial Spray Booths by GFS features a modular panel design. This approach offers the economy of a standardized line of spray booths while making available virtually unlimited sizes and configurations to fit a broad range of finishing processes. Standard models can be shipped to North American customner within 7 business days of order receipt. Modification and/or options require additional lead times.
Fast-Pack "Express" Industrial Spray Booths are available in 15 different standard sizes and configurations. Can be shipped to North American customers within 3 business days of order receipt. Modifications and/or options require additional lead times. |
.
|
|

|
 |
Exhaust Chamber
Air is filtered through an exhaust chamber as it exits the booth. Exhaust
stacks are required to ventilate the booth to the outside.
Heavy-duty Panels
GFS Open Face Booths are constructed with single-skin, 18-gauge, G-90 galvanized steel.
Solid Construction
Pre-punched booth panels and nut-and-bolt assembly takes the guesswork out of installing a paint booth, and provides more structural integrity.
Easy Filter Replacement
•
•
• |
Installing and replacing filters is easy with the grid system.
Each booth comes complete with a full set of GFS Wave 20” x 20” exhaust filters.
Avoid wasting filters by replacing only the filter squares that need changing.
An included manometer indicates when filters need to be replaced. |
Fans & Motors
High-powered fans and motors are required to create adequate airflow within a paint booth. Each GFS booth includes a non-sparking, tube axial exhaust fan(s) with belt guards and duct connector ring, and a 3-phase, TEFC, tri-voltage motor(s) with variable pitch pulley.
Superior Lighting
The majority of GFS’ open face booths feature integrated 4-tube, inside-access fluorescent light fixtures. GFS light fixtures are ETL listed (Class 1 Division 2) and come complete with T-8 color-corrected tubes. |
|
Deciding on the right size paint booth isn’t always an easy task. Use the following guidelines to help you determine the appropriate size booth for your needs.
Width: Width of the largest item (including fixture or pallet) plus 5 feet
Height: Height of the largest item (including fixture or pallet) plus 2 feet
Depth: Depth of the largest item plus 3 feet (clearance at the rear) |
Additional Sizing Considerations
-
Conveyorized Booths: Width must be sufficient to allow finishers to complete the finishing operation within the allotted time. Spraying should not be closer than 2 feet from the conveyor opening.
-
-
Bridge Intake Chambers w/ Solid Doors: Booth opening is decreased by 2 feet high and 4 feet wide on a booth with a bridge intake chamber
-
-
Filtered Doors for Large Booths (12 Ft. wide or larger): Booth opening is decreased by 4 feet wide when using filtered doors on large booths.
|
-
Fast-Pack "Express" Internal Dimensions |
Bench Top |
|
Booths |
Width |
3', 4', 5', 7' |
Width |
6', 8', 10' |
Height |
4' |
Height |
7', 8' |
Depth |
2', 3' |
Depth |
6', 9' |
-
Standard Internal Dimensions |
Bench Top |
|
Booths |
Width |
3', 4', 5', 7' |
Width |
6', 8', 10', 12', 14', 16', 18', 20' |
Height |
4' |
Height |
7', 8', 10', 12' |
Depth |
2', 3' |
Depth |
6', 9', 12' |
|
|
 |
 |
•
•
•
•
•
•
• |
Pre-painted white panels (May require additional lead times; consult GFS).
Single-phase, explosion-proof and/or 575 V/50 Hz exhaust fan motor
Conveyor and crane openings
4-foot, 6-tube fluorescent light fixtures with color-corrected tubes
Rear-access, ETL-listed light fixtures
UL listed:
- Booth packages
- Prewired control panels
- Individual control panel components
Exhaust ductwork |
|
Paint finishing equipment manufactured by GFS is designed to meet the applicable requirements of various codes and industry recognized standards. For spray applications using flammable and combustible materials, the standards are NFPA 33 and Chapter 24 of the International Fire Code (IFC). For curing and drying applications, the standards are NFPA 86 and Chapter 30 of the IFC. Often local requirements vary from these national codes and standards so it is important that you consult the local authority having jurisdiction before specifying and purchasing paint finishing equipment. |
|

GFS Open Face Booths are available in virtually unlimited widths and depths!
Heavy-duty construction ensures many years of reliable service. |
|