bt1200 heat unit

BT1200
HEAT UNIT

Highly versatile, GFS' BT1200 heat unit can be placed on the side or rear of a paint booth, and is available in both recirculating and forced-dry models.

Download BrochureBT1200 HEAT UNIT SPECS

Unit Intake Motor Exhaust Motor Intake Fan Exhaust Fan CFM Direct-Fire Aluminum Burner Control Panel VFD Ductwork
Recirculating
(BTRC)
10-hp direct-drive 7.5-hp
belt-driven
Air-foil, centrifugal fan 34" tube axial 12,000 1.2 MBTU (Natural gas or propane) ENGAGE 7.5hp exhaust 34” round intake & exhaust duct for 15’ roof
Forced Dry (Semi-Downdraft)
(BTFD)
10-hp direct-drive 7.5-hp
belt-driven
Air-foil, centrifugal fan 34" tube axial 12,000 1.2 MBTU (Natural gas or propane) ENGAGE DUAL VFD 10hp/7.5hp 34” round intake & exhaust duct for 15’ roof
Forced Dry (Side-Downdraft)
(BTFD)
10-hp direct-drive 7.5-hp
belt-driven
Air-foil, centrifugal fan 34" tube axial 12,000 1.2 MBTU (Natural gas or propane) ENGAGE DUAL VFD 10hp/7.5hp 34” round intake & exhaust duct for 15’ roof

Download BrochureBT1200 HEAT UNIT STANDARD FEATURES

The following standard features come on with BT1200 Heat Units:

  • Prefiltration
  • Side- or rear-mounted
  • Automatic pressure control (Auto Balance)
  • Dual VFDs
  • Dual high limit switches
  • Door safety interlock switch, 24v

Download BrochureBT1200 HEAT UNIT OPTIONS

The following options can be added to the BT1200 HEAT UNIT:

  • 15-hp motor upgrade
  • 1.5 MBTU upgrade
  • LOGIC 3, or LOGIC 4 control panel
  • Economy mode function (requires additional VFD and spray gun flow switch)
  • Recirculation package available on Semi Downdraft booth configurations
  • Filter monitoring
  • LoNox burner
  • Low pressure burner

Download BrochureBT1200 HEAT UNIT CODE COMPLIANCE

GFS guarantees that our products meet or exceed all of the applicable codes related to the equipment. Our engineers regularly follow and contribute to the advancement of codes and standards that affect the industries that we work in. One of our engineers currently serves on the NFPA Technical Committee on Finishing Processes, a key standard in the finishing industry.

HIGHLY
VERSATILE

GFS_BT Heater

GFS’ BT1200 heat unit can be placed on the side or rear of a paint booth, and is available in both recirculating and forced-dry models. This versatility allows it to be used with most GFS auto refinish paint booths and CTOF booths.

DIRECT-FIRE
ALUMINUM BURNER

Aluminum Burner

Direct Fire Burners generate faster cabin heat rise, have a higher turndown ratio and offer better efficiency than indirect heat exchangers. Rust-resistant aluminum reduces maintenance and extends the life of the burner.

AIR-FOIL
FAN

Air Foil, Direct-Drive Centrifugal Fan

Unique to GFS heaters, the Air-Foil, Reverse Incline, Direct-Drive Centrifugal Fan maintains consistent airflow, even when filters load. The aluminum, non-sparking, air foil design delivers higher performance with less horsepower and energy consumption.

WANT TO KNOW MORE ABOUT
BT1200 HEAT UNITS? Request a Quote

Let us know your product requirements, and we will put you in touch with a distributor in your area.

Disclaimer: Product configurations are subject to change without notice

Copyright 2017 Global Finishing Solutions LLC | 12731 Norway Road, Osseo, WI 54758 | 800-848-8738