Lights |
 |
For an exceptional spray environment, GFS has a full line of light fixtures: fluorescent, incandescent, explosion proof and replacement bulbs/tubes. GFS also offers a full line of replacement light fixtures, bulbs and parts for all makes and models of finishing equipment — including paint booths, dust collection booths and blast booths.
The following is a listing of our most popular light fixtures and bulbs. For information about additional fixtures and lighting components, contact GFS Parts & Filters Sales.
|
Specification sheet - Downloads
|
T8 Paint Booth Light Fixtures
> Energy efficient
> Color-corrective T8 light tubes
> ETL and ETL-C listed
> Class I, Division 2, Groups A-D
> Inside access
Part No. |
Tube |
Length |
Lamp Size/Volt/Watt |
Inside Access Fixtures |
LABW12-4 |
4 |
4' |
T8 / 120-277V / 32W, includes tubes |
LABW12-6 |
6 |
4' |
T8 / 120-277V / 32W, includes tubes |
LABW12-4-LAM |
4 |
4' |
T8 / 120-277V / 32W, Blast Booths ONLY |
LAR12-4 |
4 |
4' |
T8 / 120-277V / 32W, for dual skin panels |
LAR12-6 |
6 |
4' |
T8 / 120-277V / 32W, for dual skin panels |
230-306 |
2 |
4' |
T8 / 120V / 32W |
230-501 |
4 |
4' |
T8 / 120-277V / 32W |
LAR12-6 |
6 |
4' |
120V, For Dual Skin Panel |
230-400 |
2 |
3' |
T8 / 120V /25W |
230-405 |
4 |
3' |
T8 / 120V / 25W |
LAB12-3-36 |
3 |
3' |
T8 / 120V / 32W |
Rear Access |
230-551 |
4 |
4' |
120V/32W |
Corner Lighting |
LAC12-4 |
4 |
4' |
120-277V / 32W |
LAC12-6 |
6 |
4' |
120-277V / 32W |
Replacement tubes |
230-281 |
T8 4' fixtures, 32W |
230-271 |
T8 3' fixtures, 25W |
|
|
|
Specification sheet - Downloads |
T5 Paint Booth Light Fixtures
Recommended for booths with high ceilings and areas working with high temperatures
> High output, energy efficient
> Color-corrected T5 tubes
> ETL and ETL-C listed
> Class 1, Division 2, Groups A-D
> Inside access
Part No. |
Tube |
Length |
Volt/Watt |
LABW-14T5-D12 |
4 |
4' |
120-277V / 54W |
LABW-16T5-D12 |
6 |
4' |
120-277V / 54W |
230-285 |
T5 Replacement tube |
|
|
 |
Incandescent Light Fixtures
Recommended for use in paint mix rooms and paint kitchens (paint storage)
> Class I, Division 1, Hazardous location
> Angle fixtures can be supported for mounting at face of booth with fixture bracket
Part No. |
Description |
Volt/Watt |
600-001 |
Ceiling Mount w/ Dome |
150/300W |
600-002 |
Wall Mount w/ Dome |
150/300W |
600-006 |
Ceiling Mount w/ Angle |
150/300W |
230-147 |
Replacement bulbs |
|
|
 |
Explosion Proof Light Fixtures
Recommended for hazardous locations such as spray booths, marines/shipyards, chemical manufacturers, oil drilling rigs and gas processing plants.
> Factory-sealed, cased aluminum with white finish reflector
> UL listed:
| |
- For use in paint spray booths and rooms |
| |
- For hazardous locations (UL 844) |
| |
- For outdoor, marine-type lighting in salt water (UL 595) |
> Class I, Division 1, Groups C & D; Class I, Divison 2, Groups A-D; Class II, Divison 2, Groups E-G
> Meets requirements for NFPA 33 and NEC Article 516
Part No. |
|
|
Volt/Watt |
230-166 |
2 |
4' |
120V/60W |
230-163 |
4 |
4' |
120V/40W |
|
|
|
