PAINT BOOTH FANSRequest a Quote


Below is a listing of our most popular fans, please contact GFS Parts & Filters Sales for additional fans and other fan components such as belts, blades, bushings, etc.

paint booth fans

 

 

Tube Axial Exhaust Fans - GFA Models

GFS tube axial fans feature a continuously welded housing for an airtight seal. The propellers are non-sparking cast aluminum for consistent air velocity at higher static pressures. The universal motor plates will allow adjustable belt tensioning. The bearings are of premium air handling quality, self-aligning, and have an L10 life of 40,000 hours. The belt guard provides protection from the rotating pulley (OSHA Requirement). Fan has been designed per AMCA 210 Standards.

 

Part No.

Size

Ring to Ring

GFA-18

18"

24"

GFA-24

24"

24"

GFA-30

30"

30"

GFA-34

34"

30"

GFA-40

40"

30"


spray booth fans

Tube Axial Exhaust Fans - TAB Models

The ideal choice for installations with straight-through airflow in ducted or non-ducted systems. These tube axial fans are designed for commercial and industrial applications where low to medium air volumes are required at lower pressures. Units are pre-assembled at the factory and includes variable-pitch motor sheaves for maximum operating efficiency and on-site adjustment.

Part No.

Size

Ring to Ring

TAB-12

12”

18"

TAB-18

18"

22"

TAB-24

24"

23"

TAB-30

30"

24"

TAB-36

36"

29"

TAB-42

42"

30"

TAB-48

48"

33"

 


high performance paint booth fans

High-Performance Vane Axial Fans

Designed for moving air through systems with resistance up to 4" water gauge loss. Vane axial fans are typically characterized by a propeller with a large hub and short, wide, airfoil blades. In addition, a set of guide vanes is installed in the fan housing to straighten out the rotation of the air stream created by the propeller. This combination of propeller design and guide vanes allows the fan to produce higher pressures and greater efficiencies. At lower static pressures, the vane axial fan will move large air volumes at lower speeds.

Size

Ring to Ring

18"

13 1/2"

20"

15"

24"

17 1/2"

30"

21 1/4"

36"

25"

42"

29"

48"

34"

 

 


paint booth exhuast fans

Mixed Flow Inline Exhaust Fans

Mixed flow inline fans can be used with clean air for supply, exhaust, or return air installations. Designed to excel in commercial applications where low sound is critical. In addition, these models are more efficient than comparably sized tubular centrifugal and vane axial fans, thus reducing the required motor horsepower and lowering operating costs.

Disclaimer: Product configurations are subject to change without notice

Copyright 2017 Global Finishing Solutions LLC | 12731 Norway Road, Osseo, WI 54758 | 800-848-8738