paint booth light fixtures

Paint Booth Lighting

ENERGY-EFFICIENT LIGHT FIXTURES

For an exceptional spray environment, GFS has a full line of light fixtures: LED, fluorescent, incandescent, explosion proof and replacement bulbs/tubes. GFS also offers a full line of replacement light fixtures, bulbs and parts for all makes and models of finishing equipment — including paint booths, dust collection booths and blast booths. 

The following is a listing of our most popular light fixtures and bulbs. For information about additional fixtures and lighting components, contact GFS Parts & Filters Sales.

 


Download BrochureT8 LED LAMPS

InstantFit LED T8 Lamps are an ideal energy saving choice for existing linear fluorescent light fixtures. Upgrade to LED easily without having to change the fixture. InstantFit LED lamps are compatible with Global Finishing Solutions linear light fixtures, including inside access and corner paint booth light fixtures, and general purpose light fixtures.

Easy Integration

InstantFit LED T8 lamps can be easily integrated into any existing Global Finishing Solutions linear fluorescent paint booth or high bay light fixtures. It’s as simple as changing out the tubes. No rewiring is required because the LED lamps use the existing electronics.

Sustainability

InstantFit LED T8 lamps emit virtually no UV or IR light, and contain no mercury, allowing for non-hazardous waste disposal. Waste is minimized when switching to LED since the lamps can be installed in existing light fixtures.

Glass-Free

You no longer have to worry about dropping and shattering your lamps. InstantFit LED lamps are glass-free, allowing for safe working conditions.

Instant On

No need to wait for light fixtures to turn on. InstantFit Lamp lamps turn on instantly at full luminosity, with no flicker or buzz.

Energy Savings

InstantFit LED T8 lamps offer significant energy savings – up to 40% when compared to traditional fluorescent 32W T8 systems. Lower energy consumption allows for short payback periods, making it easier to upgrade to LED. (Actual savings depend on your system configuration.) 

ETL Listing
Your existing Global Finishing Solutions linear light fixtures maintain original ETL listing when switching over to LED since there is no need for rewiring and the LED lamps use the existing electronics.

Tax Credits & Rebates

There may be tax credits or rebates available in your area for switching to energy-efficient LED lamps. Check with your local municipality or visit www.dsireusa.com.

Download BrochureHIGH BAY FLUORESCENT LIGHTS

These fixtures were specifically designed for general purpose applications and meant to replace metal halide lighting and T-12 light fixtures to improve energy efficiency. GFS high-bay lights are ideal for structures such as warehouses, commercial buildings and gymnasiums.

  • T5 & T8 light fixtures
  • 6-tube fixtures
  • Energy efficient

Learn More >

High Bay Light Fixtures

Download BrochurePAINT BOOTH T8 LIGHT FIXTURES

  • Energy efficient
  • Color-corrected T8 light tubes
  • ETL and ETL-C listed
  • Class I, Division 2, Groups A-D
  • Inside access
T8 paint booth light
Part number Tube Length Lamp size/Volts/Watt
Inside Access Fixture
LABW12-4 4 4' T8 / 120-277V / 32W, includes tubes
LABW12-6 6 4' T8 / 120-277V / 32W, includes tubes
LABW12-4-LAM 4 4' T8 / 120-277V / 32W, Blast Booths ONLY
LAR12-4 4 4' T8 / 120-277V / 32W, for dual skin panels
LAR12-6 6 4' T8 / 120-277V / 32W, for dual skin panels
230-306 2 4' T8 / 120V / 32W
230-501 4 4' T8 / 120-277V / 32W
LAR12-6 6 4' 120V, For Dual Skin Panel
230-400 2 3' T8 / 120V /25W
230-405 4 3' T8 / 120V / 25W
LAB12-3-36 3 3' T8 / 120V / 32W
Rear Access
230-551 4 4' 120V/32W
Corner Lighting
LAC12-4 4 4' 120-277V / 32W
LAC12-6 6 4' 120-277V / 32W

Replacement Tubes

T8 4' fixtures, 32W - Part no. 230-281

T8 3' fixtures, 25W - Part no. 230-271

Download BrochurePAINT BOOTH T5 LIGHT FIXTURES

  • Energy efficient
  • Color-corrected T5 light tubes
  • ETL and ETL-C listed
  • Class I, Division 2, Groups A-D
  • Inside access
T5 paint booth light
Part number Tube Length Volts/Watt
LABW-14T5-D12 4 4' 120-277V / 54W
LABW-16T5-D12 6 4' 120-277V / 54W

Replacement Tubes

T5 Replacement tube- Part no. 230-285

Download BrochurePAINT BOOTH INCANDESCENT LIGHT FIXTURES

Recommended for use in paint mix rooms and hazardous materials storage rooms.

  • Class I, Division 1, Hazardous Location
  • Angle fixtures can be supported for mounting at face of booth with fixture bracket
incandescent paint booth light
Part number Description Volts/Watt
600-001 Ceiling Mount w/ Dome 150/300W
600-002 Wall Mount w/ Dome 150/300W
600-006 Ceiling Mount w/ Angle 150/300W

Replacement Tubes: Part no. 230-147

Download BrochurePAINT BOOTH EXPLOSION-PROOF LIGHT FIXTURES

Recommended for hazardous locations such as spray booths, marines/shipyards, chemical manufacturers, oil drilling rigs and gas processing plants.

  • Class I, Division 1, Hazardous Location
  • Angle fixtures can be supported for mounting at face of booth with fixture bracket
Explosion Proof paint booth light
Part number Tube Length Volts/Watt
230-166 2 4' 120V/60W
230-163 4 4' 120V/40W

GFS guarantees that our products meet or exceed all of the applicable codes related to the equipment. Our engineers regularly follow and contribute to the advancement of codes and standards that affect the industries that we work in. One of our engineers currently serves on the NFPA Technical Committee on Finishing Processes, a key standard in the finishing industry.

LIGHT BOOSTING 
REFLECTOR

Increase the luminosity of your paint booth with this simple upgrade. GFS’ unique reflector shape and material focuses more light where you need it, more efficiently directing the light toward the working area of your paint booth. The light reflectors can easily be installed behind the light tubes, increasing the luminosity of fixtures by 20%. You can achieve the same level of luminosity with fewer bulbs than our competitors, saving energy and maintenance costs.

Only available for GFS 4-tube light fixtures.
pain booth light reflector

INSTANT-FIT
LED LIGHTS

GFS LED lights

LED T8 InstantFit Lamps are an ideal energy saving choice for existing linear fluorescent fixtures. Compatible with GFS paint booth lighting including our inside access, corner and general purpose light fixtures.


HIGH BAY
FLUORESCENT LIGHTS

Highbay light fixtures

Designed as an energy-efficient alternative to metal halide lights and T-12 light fixtures, GFS’ High Bay Light Fixtures can be used in a variety of industrial and general purpose settings. Common applications include commercial buildings, gymnasiums, industrial facilities and warehouses.

PAINT BOOTH
T8 LIGHT FIXTURES

T8 Light Fixtures

GFS T8 light fixtures were designed with corrected tubes for excellent color-matching and illumination while being cost effective. For an exceptional spraying environment, choose from our 6-tube or 4-tube wall or corner fixtures.


WANT TO KNOW MORE ABOUT 
LIGHT FIXTURES & LED BULBS? Request a Quote

Let us know your product requirements, and we will put you in touch with a distributor in your area.

Disclaimer: Product configurations are subject to change without notice

Copyright 2015 Global Finishing Solutions LLC | 12731 Norway Road, Osseo, WI 54758 | 800-848-8738