The most versatile line of spray booths, CONCEPT spray booths are available in all four airflow models, multiple configurations, and with optional equipment designed to fit any shop, any size, anywhere.
With the CONCEPT spray booth line, you get your booth, your way, with no compromises. GFS incorporates exclusive technologies and innovative engineering into every CONCEPT booth for a single-skin spray booth with unequaled performance and quality.
BT1200-RC Recirculating
•Standard with Downdraft model
BT1200-FC Forced Dry
•Optional with Side-Downdraft and Semi-Downdraft models
BT12oo High-Efficiency Heat Groups:
Designed for indoor use
-10 hp Direct-drive intake motor
-7.5 hp Belt-drive exhaust motor
-34" Tube-axial exhaust fan
-12,000 CFM
-1.2 Million BTU direct-fire burner
-Auto pressure control
CureTronic Control Panel:
Easy-to-Use, fully programmable PLC control panel with SmartCure allows custom 'Heat vs. Time' cure cycles. Standard with Downdraft, upgrade available with BT1200 Heat Group for other models.
Concept Downdraft
High Performance Paint Booth
Following in the tradition of one of the most popular booths ever, the Concept Downdraft raises the bar for single-skin downdraft spray booths. Featuring downdraft airflow, angled ceiling lights, and a high-efficiency heat system, the Concept Downdraft outperforms anything else in its class.
Cabin Specifications:
Internal: 14'w x 9'h x 24'l
External: 14'4"w x 11'h x 24'4"l
3-wing Entry Door: 9'8"w x 8'10"h
-Full Downdraft airflow for spray and cure
-White pre-coated galvanized steel
-Rolled-edge panel construction
-Eight 4-tube hip-style light fixtures, 120/277V
-Four 4-tube sidewall light fixtures, 120/277V
-Light wiring harness and limit switch
-One personnel access door 32-1/4"w x 7'8"h
-Single row exhaust pit
-Booth pressure balancing gauge
BT1200RC Recirculating Heat Group
Designed for indoor use
-10 hp Direct-drive intake motor
-7.5 hp Belt-drive exhaust motor
-34" Tube-axial exhaust fan, 12,000 CFM
-1.2 Million BTU direct-fire burner
-Exhaust-mounted Variable Frequency Drive
-Auto pressure control
-CureTronic remote panel with SmartCure
Concept Side-Downdraft Downdraft airflow with no pit!
It's no secret that there are some body shops where you just can't install a pit for a downdraft booth. With no pit required, the Concept Side-Downdraft is a high-performance spray and cure solution without the need to excavate
Cabin Specifications:
Internal: 14'w x 9'h x 24'l
External: 17'4"w x 12'10"h x 24'4"l
3-wing Entry Door: 9'8"w x 8'10"h
-Downdraft side-exhaust airflow for spray and cure
-White pre-coated galvanized steel
-Rolled-edge panel construction
-Eight 4-tube hip-style light fixtures, 120/277V
-Three 4-tube sidewall light fixtures, 120/277V
-Light wiring harness and limit switch
-One personnel access door 32-1/4"w x 7'8"h
- 2 x 24" tube-axial exhaust fans
-7.5 hp exhaust motors, 12,000 CFM
-Exhaust-mounted Variable Frequency Drive
-Filter draft monitoring gauge
-Side exhaust plenums with high-efficiency filters
-Optional heat group and pressurizing plenum upgrades available
The Concept Semi-Downdraft is an economical booth designed for body shops where installing a pit is not possible. Ease of operation and proven reliability makes this booth a great paint-and-cure environment.
Cabin Specifications:
Internal: 14'w x 9'h x 24'l
External: 14'4"w x 11'h x 27'4"l
3-wing Entry Door: 9'8"w x 8'10"h
-Semi-downdraft airflow for spray and cure
-White pre-coated galvanized steel
-Rolled-edge panel construction
-Eight 4-tub hip-style light fixtures, 120/277V
-Four 4-tube sidewall light fixtures, 120/277V
-Light wiring harness and limit switch
-One personnel access door 32-1/4"w x 7'8"h
-34" tube-axial exhaust fan
-5 hp exhaust motor, 12,000 CFM
-Exhaust-mounted Variable Frequency Drive
-Filter draft monitoring gauge
-Rear exhaust box high-efficiency filters
-Optional heat group and pressurizing plenum upgrades available
Concept Crossdraft Proven airflow design
The Concept Crossdraft takes a popular and classic spray booth design and integrates energy-saving components to create a very economical paint-and-cure booth.
Cabin Specifications:
Internal: 14'w x 9'h x 24'l
External: 14'4"w x 9'6"h x 27'4"l
3-wing Entry Door: 9'8"w x 8'10"h
-Crossdraft airflow for spray and cure
-White pre-coated galvanized steel
-Rolled-edge panel construction
-Twelve 4-tube sidewall light fixtures, 120/277V
-Light wiring harness and limit switch
-One personnel access door 32-1/4"w x 7'8"h
-34" tube-axial exhaust fan
-5 hp exhaust motor, 12,000 CFM
-Exhaust-mounted Variable Frequency Drive
-Filter draft monitoring gauge
-Filtered entry doors with high-efficiency filters
-Rear exhaust box high-efficiency filters
-Optional exhaust yoke
Optional AdvanceCure Accelerated Airflow System:
AdvanceCure Accelerated Airflow System is optional on all Concept models. Adding AdvanceCure to the interior of the booth vastly improves the productivity of the equipment. AdvanceCure introduces controlled turbulence into the paint booth during the flash-off and cure cycles to rapidly draw vapors out of the painted surfaces. This increased airflow dramatically reduces the amount of time required for each paint job, and in turn, increases the profitability of your body shop. AdvanceCure speeds curing of both solvent-based and waterborne paints, so you can be sure that your finishing operation will improve today, and well into the future.
Optional Equipment:
CONCEPT Spray Booth Cabin Options:
-Cabin extensions to 27' long, with or without lights
-Drive-Thru door packages
-4-wing entry door upgrades - not including Crossdraft
-3 row exhaust pit or raised basement - Downdraft only
-4-Tube or 6-Tube corner lights
-Pressurizing plenum packages - Side-Downdraft or Semi-Downdraft models
-Exhaust yoke package - for Crossdraft
-Additional personnel access doors
-Paint mix rooms available in free-standing, attached, or vestibule designs
-Cabins designed to accept fire suppression systems.
- AdvanceCure Accelerated Airflow System
BT1200 Optional Equipment:
-Non-heated units available
-1.5 million BTU upgrade
-15hp intake motor upgrade
-Twin Variable Frequency Drive (VFD) packages
-Natural Gas or propane fuel options
-Side, rear, or roof-mounted units available
Code Compliance:
NFPA-33 Standard for spray application using flammable or combustible materials
NFPA-86 Standard for ovens and furnaces
NFPA-91 Standard for exhaust systems for air conveying of materials
NFPA-101 Life Safety Code
NFPA-70 National Electric Code
OSHA Safety and Health Standards (29 CFR 1910, 1910.107)
BOCA National Fire Prevention Code; National Building Code; National Mechanical Code
ICBO Uniform Fire Code Article 45
SBCCI Standard Fire Prevention Code
ICC International Building Code
ICC International Fire Code Chapter 15
This booth has been reviewed and approved by:
ETL Equipment Testing Laboratory report # 3049856 Cabin
All Fixtures are ETL approved for hazardous locations.
All light fixtures are accessible from the interior of the spray booth and conform to the provisions of N.F.P.A. 33.
Electrical components, such as motors, motor starters, disconnect switches and push buttons, are listed or approved for the Class and Division in which they are located. Motors UL recognized PRGYZ, Marathon Electric file E49747 (or equal), Glass used in the spray booth is tempered and meets and exceeds ANSI Z-97.1 standard. Conformance to all these requirements is dependent upon the manner in which the equipment is installed. The contractor will make certain that all the electrical wiring and conduit, piping, gas supply, roof penetrations, automatic fire penetrations, automatic fire protection systems, and the location of the equipment within the building also conforms to the cited codes and other references. Fire suppression system is NOT included with the standard booth but is required by NFPA-33.
Global Finishing Solutions 12731 Norway Road • Osseo, WI • 54758 P800-848-8738 • F715-597-2193 • info@globalfinishing.com
