performer xp1 paint booth

Performer® XP1
Standard dual-Skin Paint Booth

 

The Performer® XP1 is the fully loaded version of GFS’ most popular, affordable paint booth. With added features such as an integrated AdvanceCure® system, ECO package, 2-row pit, best-in-class heater and LOGIC 3 control panel, the Performer XP1 takes the standard paint booth to a new level.

 


Download BrochurePERFORMER® XP1 PAINT BOOTH SPECS

  Heat System Internal Dimensions (w x h x l) External Dimensions (w x h x l) 6-Tube Hip Lights 6-Tube Sidewall Lights Dual-Row Pit Length
27' Downdraft GUL2000 14' x 9' x 27' 14'5" x 11' x 27' 8 4 24'

Download BrochurePERFORMER® XP1 PAINT BOOTH AIRFLOW

Downdraft Airflow
Generally accepted as the best airflow style, downdraft booths do an excellent job of controlling overspray and contamination. Air flows vertically from the ceiling intake plenum at the top of the booth, over the vehicle, and into the filtered exhaust pit in the floor.

High-Performance Airflow Ceiling

A classic design, the High-Performance Airflow ceiling (HPAC) is simple in its construction and concept, yet yields impressive performance. A full-filtered ceiling provides excellent air filtration and contamination control, and the integrated hip-style ceiling lights illuminate where you need it most.

Download BrochurePERFORMER® XP1 PAINT BOOTH CONSTRUCTION

Dual-Skin Panels
Pre-coated, dual-skin insulated panels provide a smooth fit and finish on the booth. Insulation between the panels cuts down on noise and keeps heated air inside the cabin.

 

Rust-Resistant Panels
Our auto refinish booth panels are made of rust-resistant G-40 galvanized sheet steel that is primed and coated on both sides with a baked-on polyester topcoat, providing a rust-resistant cabin even in the harshest of environments.

 

Easy Installation
The unique H-channel construction design allows for easy booth setup. Six-inch galvanized steel ‘h-channel’ columns connect to booth wall panels without nuts and bolts.

 

Leak-Proof Seals
Panels come together with a virtually airtight seal. This leak-proof seal reduces the potential for contamination, resulting in a cleaner booth and reduced maintenance.
Solid Construction, Less Contamination
Vertical wall panels allow for a reduced number of joints and seams in the cabin’s construction. By reducing the number of joints, you are left with a stronger, longer-lasting booth. Fewer seams allows for smoother interior walls, which are less likely to collect dirt and overspray, and are easier to clean.

 

Easy-Access Filters
Hinged ceiling filter racks swing down for easy filter replacement.

 

Quality Down to the Nuts and Bolts
GFS uses only top-quality hardware, ensuring ease of use and years of reliable service. Our weld-free designs prevent against weak points and corrosion, making for a sturdy, long-lasting booth.

 

Level is Key
Floor track leveling, a heavy-duty, c-channel outer floor profile, compensates for up to a 1 5/8” slope in your shop floor. This unique engineered feature can be easily adjusted, speeds up installation and improves the overall fit and finish.

Download BrochurePERFORMER® XP1 PAINT BOOTH LIGHTING

Shadow-Free Lighting
GFS has designed all of our auto refinish paint booths with vertical sidewall lights and angled ceiling lights. The combination of the two allows the painter to move freely around the vehicle with less light interaction. This creates a virtually shadow-free environment, perfect for color matching and precise application of paint.
Complete Lighting Package
All GFS paint booths come complete with light fixtures and color-corrected tubes.

 

Download BrochurePERFORMER® XP1 PAINT BOOTH HEAT SYSTEM

GUL2000 Heat Unit

GFS’ top-of-the-line heat system, GUL2000 heat units come standard with the Performer® XP1 paint booth. Features such as exhaust-mounted VFD, direct-drive exhaust motor and direct-fired aluminum burner make this heat unit highly efficient.

Intake Motor Exhaust Motor Intake Fan Exhaust Fan CFM Direct-Fire Aluminum Burner Control Panel VFD Ductwork
10-hp direct-drive 10-hp direct-drive Air-foil, reverse incline, direct-drive centrifugal fan Air-foil, reverse incline, direct-drive centrifugal fan 12,000 1.2 MBTU (Natural gas or propane) LOGIC 3 10-hp exhaust 34” round intake & exhaust duct for 15’ roof

Learn more about GUL2000Heat Units>

Download BrochurePERFORMER® XP1 PAINT BOOTH CONTROLS

LOGIC 3 Control Panel

Designed with everything you need to control your booth, the LOGIC 3 control panel is an impressive yet simple control system. Users have the majority of the same user-programmable features as the LOGIC 4, but on a smaller, more simplified user interface.

  • 6" monochrome interface
  • Controls for AdvanceCure®, SmartCure®, SmartFlash, filter monitoring and economy mode
  • Ability to turn individual AdvanceCure® blowers on and off during flash and cure modes
  • 3 SmartFlash profiles, with 3 programmable segments each
  • 3 SmartCure® profiles, with 3 programmable sections each
  • Self diagnostics to help you easily identify service issues

 

Download BrochurePERFORMER® XP1 PAINT BOOTH OPTIONS

All of GFS’ booths can be customized to meet your unique specifications. The following options can be added to a Performer® XP1 booth:

  • Drive-thru configuration
  • 3-row pit upgrade
  • Booth basement
  • LOGIC 4 control panel
  • 4-tube or 6-tube corner or side wall light fixtures
  • LED light fixtures
  • Exhaust yoke (adds 3 ft. to exterior length)

Download BrochurePERFORMER® XP1 PAINT BOOTH CODE COMPLIANCE

GFS guarantees that our products meet or exceed all of the applicable codes related to the equipment. Our engineers regularly follow and contribute to the advancement of codes and standards that affect the industries that we work in. One of our engineers currently serves on the NFPA Technical Committee on Finishing Processes, a key standard in the finishing industry.

GLOBAL FINISHING SOLUTIONS'
XP1 PAINT BOOTH PACKAGE

GFS' Performer® XP1 paint booth is the fully loaded version of our most affordable spray booth. Incorporated into this booth is virtually every feature that set GFS booths apart from the rest.

The Performer® XP1 booth includes added features such as integrated AdvanceCure Blade® System, two-row exhaust pit, dual VFDs, best-in-class heater and upgraded smart controls for superior performance and energy efficiency.

DUAL-SKIN
INSULATED PANELS

GFS Dual Skin Panels

GFS’ pre-coated, dual-skin insulated panels provide a smooth fit and finish with no exposed wires or cables. Insulated panels cut down on noise and reduce ambient heat outside of the booth, while keeping heated air inside the cabin.


ADVANCECURE® ACCELERATED
AIRFLOW SYSTEM

advancecure blade

GFS Performer® XP1 paint booths come standard with a fully integrated AdvanceCure Blade® System. Developed to help collision centers be more productive, efficient and profitable, GFS' AdvanceCure® Accelerated Airflow System drastically improves drying or curing times for waterborne and solvent-based coatings.

Learn More About AdvanceCure® >

LOGIC 3
CONTROL PANEL

logic 3 control panel

Designed with everything you need to control your booth, the LOGIC 3 control panel is an impressive yet simple control system. Users have the majority of the same user-programmable features as the LOGIC 4, but on a smaller, more simplified user interface.

 

WANT TO KNOW MORE ABOUT THE
PERFORMER XP1 PAINT BOOTH? Request a Quote

Let us know your product requirements, and we will put you in touch with a distributor in your area.

Disclaimer: Product configurations are subject to change without notice

Copyright 2017 Global Finishing Solutions LLC | 12731 Norway Road, Osseo, WI 54758 | 800-848-8738