In-Line RHT® for Continuous Cleaning
Hooks — Racks
A Custom Designed Option for All High-Production Systems
FAST . . .
EFFICIENT . . .
Within 4 to 6 Minutes, the Process Heater Removes Paint from Racks and Hooks
Racks and hooks travel through a refractory-lined heated chamber, where air temperature of 1000ºF to 1200ºF ignite the paint, turning it to ash. The hooks and racks are then conveyed to a washer where water cools them, removing most of the ash. To conserve resources, water is re-circulated through the system. An optional filter (Model no. D8RHT) is available for removing excess ash from the water stream. The RHT can either be installed in-line or as a satellite system.
|
|
Iso-Dynamic High-Velocity Curing Oven — Cut Curing Time up to 70%
The process consists of 2 basic components: a heat source and an air distribution system. The heat source is an air heater complete with a gas-fired burner. The burner operates under pressure and is connected to a blower that provides filtered air to the air heater. The heated air is then transferred to the process area through an air distribution system that is a network of ducting and jet pipes.
The ISO-Dynamic Process uses a high-pressure, low volume airflow system, no mechanical re-circulation of air is required. Re-circulation is achieved through internal entrainment. As heated air is ejected through sized orifices in the jet pipes, a consistent turbulence is created in the process area. The impact velocity of the mixed air to the work surface is approximately 800 fpm. Also consider that the heated air has expanded through the heater box and is at a higher volume and lower density. This is referred to as "Soft Air".
The ISO-Dynamic Process provides consistent temperatures and airflows throughout the process work area. Operating temperature range is 100°F to 500°F for standard construction and modular design allows for independent zone control. Multi-pass conveyor arrangements and work opening profiles can be provided to meet customer requirements. ISO-Dynamic ovens are factory assembled and test fired prior to shipment.
|
