GFS Open Face Spray Booths

Open Face Paint BoothS

Our most popular and affordable product line, Open Face Paint Booths provide a bright, safe and clean environment for your finishing operations. Standard Global Finishing Solutions® (GFS) Open Face Booths feature GFS Wave® exhaust filters for excellent overspray capture and heavy-duty panels with sturdy nut-and-bolt construction, providing you with a solid, efficient booth at an excellent value.

Open Face Paint Booths have a short lead time to get you up-and-running quickly. If you need a customized booth, GFS can design and build them in virtually any size or configuration to meet your specific requirements.

 

 Open Face Booths Starting at $2,384

Learn More about Special Pricing

Download BrochureOPEN FACE BOOTH FEATURES

The following features come standard on GFS Open Face Paint Booths:

Easy Filter Replacement

Installing and replacing filters is easy with the grid system. Because each Open Face Booth comes complete with a full set of GFS Wave 20 in. x 20 in. exhaust filters, you can avoid waste and save cost by replacing only the filter squares that need changing. An included manometer indicates when filters need to be replaced.

Heavy-Duty Panels

GFS Open Face Paint Booths are constructed with single-skin, 18-gauge, G90 galvanized steel. 

Solid Construction
Sturdy construction, pre-punched booth panels and nut-and-bolt assembly take the guesswork out of installing a paint booth and provide more structural integrity. Assembly hardware included.

 

Superior Lighting
The majority of GFS’ Open Face Paint Booths feature integrated four-tube, inside-access fluorescent light fixtures for excellent brightness and easy tube replacement. GFS light fixtures are Class 1, Division 2 ETL/ETL-C listed and come complete with T8 color-corrected tubes.

Exhaust Chamber
Air is filtered through an exhaust chamber as it exits the booth. Exhaust stacks are required to ventilate the booth to the outside.

Fans & Motors
High-powered fans and motors create adequate airflow through the paint booth, creating a cleaner environment for a better paint job. Each Open Face Booth includes a non-sparking, tube axial exhaust fan with belt guards and duct connector ring, and a three-phase, TEFC, tri-voltage motor(s) with variable pitch pulley.

Download BrochureSELECTING A BOOTH SIZE

booth sizing

Selecting a Booth Size

Use the following guidelines to help you determine the appropriate size booth for your needs:
  • Interior Width: Add 5 ft. to the width of the largest item that will be put in the booth (include fixture or pallet size)
  • Interior Height: Add 2 ft. to the height of the largest item that will be put in the booth (include fixture or pallet size)
  • Interior Depth: Add 5 ft. to the depth of the largest item that will be placed in the booth.

Additional Sizing Considerations

Global Finishing Solutions’ Sales and Design departments ensure that the booth and shop are configured to best accommodate the customer’s painting and finishing needs. The following items must be considered when determining booth size, location and configuration:
  • Square Footage: Ceiling heights and floor space must be sufficient to accommodate the booth’s exterior dimensions as well as the dimensions of other product offerings, such as Paint Mix Rooms, Dust Collection or Hazardous Material Storage Buildings.
  • Shop Height: GFS recommends that you allow 3 ft. between the top of the booth and the shop ceiling to allow space for maintenance, installation and an exhaust fan, if they are positioned at the top of the booth.
    Note: Outdoor Large Equipment Booths are available for locations with limited shop space.
  • Maneuvering Vehicles and Equipment: Depending on the floor layout and sizes of the products being painted or finished, it may be difficult to move product into and out of the booth. Make sure there is sufficient space to move around corners and approach the product doors straight on.
  • Bridge Chambers with Solid Doors: The booth opening dimensions are decreased by 2 ft. in height and 4 ft. in width on a booth with a bridge chamber. Take this into account when determining booth and door size.
  • Door Swing Range: Allow for sufficient space for filtered or solid swing doors to open fully to allow product entrance. If space at the front or rear of the booth is limited for product entry and/or exit, bi-fold, tri-fold, sliding and roll-up doors are available as options on GFS Large Equipment and General Purpose Booths.
  • Conveyor: Width must be sufficient to allow finishers to complete their operation within the allotted time. Spraying should not be completed less than 2 ft. from the conveyor opening.

Download BrochureOPEN FACE BOOTH OPTIONS

GFS paint booths can be customized to meet your unique specifications. The following options can be added to an Open Face Paint Booth:

  • White, pre-coated panels (may require additional lead time; consult GFS)
  • Single-phase, explosion-proof and/or 575 V/50 Hz exhaust fan motor
  • Six-tube fluorescent light fixtures with color-corrected tubes
  • Four- or six-tube light fixtures with LED tubes
  • Rear-access, ETL and ETL-C listed light fixtures
  • UL and CUL listing available on certain booth packages
  • UL and CUL listing available on prewired control panels and individual control panel components
  • Exhaust ductwork
  • Product and Personnel Door Options

Additional Costs
Air solenoid valves are required for all Open Face Booth installations and proper air make-up units are recommended by GFS. These items are priced separately; please contact GFS for more information.

booth sizing

Download BrochureOPEN FACE BOOTH CODE COMPLIANCE

GFS guarantees that our products meet or exceed all of the applicable codes related to the equipment. Our engineers regularly follow and contribute to the advancement of codes and standards that affect the industries that we work in. One of our engineers currently serves on the NFPA Technical Committee on Finishing Processes, a key standard in the finishing industry.

GFS WAVE
EXHAUST FILTERS

GFS_WAVE Filters

All GFS Open Face Paint Booths come complete with GFS Wave exhaust filters. Exclusive to GFS, the Wave filter is the most versatile single-stage filtration media made for paint spray booths. The unique “wave” design allows the filter to capture and retain overspray, reducing run-off. This means less booth floor cleanup and quicker, more efficient filter changes.

EXTENSIVE
SIZING OPTIONS

Open Front Paint Booth Extensions

GFS Open Face Booths are available in more than 100 standard models. With booths in various widths, lengths and depths, you are sure to find the right size booth for your application. Additionally, you can add work depth to your booth easily with booth extensions.

CUSTOM
SOLUTIONS

Custom Open Face Paint Booth

GFS is the leader in custom designed paint booths. If a standard Open Face Paint Booth model doesn’t meet your requirements, GFS can custom design a booth to fit your application. Custom options include conveyor openings.


WANT TO KNOW MORE ABOUT
OPEN FACE PAINT BOOTHS? Request a Quote

Let us know your product requirements, and we will put you in touch with a distributor in your area.

Disclaimer: Product configurations are subject to change without notice

Copyright 2017 Global Finishing Solutions LLC | 12731 Norway Road, Osseo, WI 54758 | 800-848-8738