ultra xp11 paint booth

Ultra® XP1
Premium dual-Skin PAINT Booth

The best in class, GFS’ Ultra XP1 paint booth sets the standard for auto refinish spray booths worldwide. Incorporated in this booth is virtually every feature that set GFS booths apart from the rest.

The Ultra XP1 booth includes premium lighting, airflow, ceiling design and construction, as well as ‘eco’ and waterborne friendly features. No other paint booth can match the Ultra XP1’s levels of production capability, fuel and energy efficiency, contamination control, and ease of operation.

Download BrochureULTRA® XP1 PAINT BOOTH SPECS

  Heat System Internal Dimensions (w x h x l) External Dimensions (w x h x l) 6-Tube Ceiling Lights 6-Tube Sidewall Lights Dual-Row Pit Length
27' Downdraft GUL2000 14' x 9' x 27' 14'5" x 11' x 27'5" 8 6 24'
30' Downdraft GUL2000 14' x 9' x 30' 14'5" x 11' x 30'5" 10 6 27'

Download BrochureULTRA® XP1 PAINT BOOTH AIRFLOW

Down draft Airflow
Downdraft Airflow
Generally accepted as the best airflow style, downdraft booths do an excellent job of controlling overspray and contamination. Air flows vertically from the ceiling intake plenum at the top of the booth, over the vehicle, and into the filtered exhaust pit in the floor.
CAF Ceiling
Controlled Airflow Ceiling
A GFS exclusive design, the Controlled Airflow (CAF) ceiling maximizes the effectiveness of downdraft airflow. The main airflow zone creates a protective envelope of air around the vehicle, while secondary zones keep overspray off booth walls and contaminants out of the paint job.

 

Download BrochureULTRA® XP1 PAINT BOOTH CONSTRUCTION

Dual Skin Panel
Dual-Skin Insulated Panels
Pre-coated, dual-skin insulated panels provide a smooth fit and finish on the booth. Insulation between the panels cuts down on noise and keeps heated air inside the cabin.

 

Protective Coating
Rust-Resistant Panels
Our auto refinish booth panels are made of rust-resistant G-40 galvanized sheet steel that is primed and coated on both sides with a baked-on polyester topcoat, providing a rust-resistant cabin even in the harshest of environments.

 

Dual Skin Panel
Easy Installation
The unique H-channel construction design allows for easy booth setup. Six-inch galvanized steel ‘h-channel’ columns connect to booth wall panels without nuts and bolts.

 

4-wing door
4-Wing Entry Door
Constructed of white pre-coated, 20-gauge sheet steel on a 16-gauge frame. Our 4-wing entry doors come with with 4 observation windows.

 

Air Tight Seal
Leak-Proof Seals
Panels come together with a virtually airtight seal. This leak-proof seal reduces the potential for contamination, resulting in a cleaner booth and reduced maintenance.
Vertical Panels
Solid Construction, Less Contamination
Vertical wall panels allow for a reduced number of joints and seams in the cabin’s construction. By reducing the number of joints, you are left with a stronger, longer-lasting booth. Fewer seams allows for smoother interior walls, which are less likely to collect dirt and overspray, and are easier to clean.

 

Filter Access
Easy-Access Filters
Hinged ceiling filter racks swing down for easy filter replacement.

 

Nuts and Bolts
Quality Down to the Nuts and Bolts
GFS uses only top-quality hardware, ensuring ease of use and years of reliable service. Our weld-free designs prevent against weak points and corrosion, making for a sturdy, long-lasting booth.

 

Level Floor
Level is Key
Floor track leveling, a heavy-duty, c-channel outer floor profile, compensates for up to a 1 5/8” slope in your shop floor. This unique engineered feature can be easily adjusted, speeds up installation and improves the overall fit and finish.

Download BrochureULTRA® XP1 PAINT BOOTH LIGHTING

Six Tube Lights
Shadow-Free Lighting
GFS has designed all of our auto refinish paint booths with vertical sidewall lights and angled ceiling lights. The combination of the two allows the painter to move freely around the vehicle with less light interaction. This creates a virtually shadow-free environment, perfect for color matching and precise application of paint.
Light Package
Complete Lighting Package
All GFS paint booths come complete with light fixtures and color-corrected tubes.

 

Download BrochureULTRA® XP1 PAINT BOOTH HEAT SYSTEM

GUL2000 Heat Unit

GFS’ top-of-the-line heat system, GUL2000 heat units comes fully upgraded, and standard with the Ultra® XP1 paint booth. Features such as exhaust-mounted VFD, direct-drive exhaust motor and direct-fired aluminum burner make this heat unit highly efficient.

Intake Motor Exhaust Motor Intake Fan Exhaust Fan CFM Direct-Fire Aluminum Burner Control Panel VFD Ductwork
15-hp direct-drive 15-hp direct-drive Air-foil, reverse incline, direct-drive centrifugal fan Air-foil, reverse incline, direct-drive centrifugal fan 12,000 1.5 MBTU (Natural gas or propane) LOGIC 4 15-hp exhaust 34” round intake & exhaust duct for 15’ roof

Learn more about GUL2000 Heaters>

Download BrochureULTRA® XP1 PAINT BOOTH CONTROLS

LOGIC 4 Control Panel

Standard on all Ultra® XP1 paint booths, the LOGIC 4 control panel is the most advanced and user-programmable spray booth control system on the market. This top-of-the-line control panel allows you complete control over the booth, and the ability to easily switch from waterborne to solvent base.

Features Logic

  • 10” color interface
  • Controls for AdvanceCure®, SmartCure®, SmartFlash, filter monitoring and economy mode
  • Ability to turn individual AdvanceCure® blowers on and off during flash and cure modes
  • 3 SmartFlash profiles, with 3 programmable segments each
  • 6 SmartCure® profiles (3 water borne and 3 solvent), with 5 programmable sections each
  • Self diagnostics to help you easily identify service issues

 

Download BrochureULTRA® XP1 PAINT BOOTH OPTIONS

All of GFS’ booths can be customized to meet your unique specifications. The following options can be added to an Ultra® XP1 booth:

  • Drive-thru configuration
  • 3-row pit upgrade
  • Booth basement
  • LED light fixtures
  • Sidewall observation window

 

Download BrochureULTRA® XP1 PAINT BOOTH CODE COMPLIANCE

OSHA

GFS guarantees that our products meet or exceed all of the applicable codes related to the equipment. Our engineers regularly follow and contribute to the advancement of codes and standards that affect the industries that we work in. One of our engineers currently serves on the NFPA Technical Committee on Finishing Processes, a key standard in the finishing industry.

GLOBAL FINISHING SOLUTIONS'
XP1 PAINT BOOTH PACKAGE

Our premium paint booth, GFS' Ultra® XP1 paint booth sets the standard for automotive paint booths worldwide. Incorporated into this booth is virtually every feature that set GFS booths apart from the rest.

The Ultra® XP1 includes added features such as integrated AdvanceCure Blade® System, two-row exhaust pit, dual VFDs, best-in-class heater and upgrade smart controls for superior performance and energy efficiency.

ADVANCECURE® ACCELERATED
AIRFLOW SYSTEM

advancecure blade

GFS Ultra® XP1 paint booths come standard with a fully integrated AdvanceCure Blade® System. Developed to help collision centers be more productive, efficient and profitable, GFS' AdvanceCure® Accelerated Airflow System drastically improves drying or curing times for waterborne and solvent-based coatings.

Learn More About AdvanceCure® >

CONTROLLED
AIRFLOW CEILING

CAF paint booth ceiling

This patented, exclusive ceiling design was engineered to maximize the effectiveness of downdraft airflow. The main airflow zone creates a protective envelope of air around the vehicle, while secondary airflow zones prevent overspray from collection on the booth walls, and keep contaminants away from the paint job.

LOGIC 4
CONTROL PANEL

logic 4 control panel

The LOGIC 4 control panel is the most advanced and user-programmable spray booth control system on the market today. This innovative control panel allows you complete control over the booth, and the ability to easily switch from waterborne to solvent base.


WANT TO KNOW MORE ABOUT THE 
ULTRA® XP1 PAINT BOOTH? Request a Quote

Let us know your product requirements, and we will put you in touch with a distributor in your area.

Disclaimer: Product configurations are subject to change without notice

Join the conversation!  #globalfinishingsolutions

Facebook Logo Twitter Logo Youtube Logo Linkedin Logo Instagram Logo

   
Copyright 2017 Global Finishing Solutions LLC | 12731 Norway Road, Osseo, WI 54758 | 800-848-8738